Elite 250 L Heat Pump Cylinder – Pre-Plumbed (No Pump) ESHPP3250X
Free Delivery Available- Description
Description
The Elite 250 L Pre-Plumbed Heat Pump Cylinder (ESHPP3250X) is purpose-built for air-to-water heat-pump systems, combining premium duplex stainless-steel construction with a pre-assembled valve set for rapid installation.
Its large 2.97 m² coil ensures fast heat transfer even from low-temperature heat pumps, while 50 mm insulation keeps standing losses low.
Key Features of the Elite 250 L heat pump cylinder
- Pre-plumbed with all key G3 components – saves installation time
- No pump supplied (ready for connection to external primary circuit)
- 2.97 m² high-flow coil for rapid heat exchange
- 25-year cylinder warranty (2 years parts)
- Duplex stainless-steel vessel with 50 mm polyurethane insulation
- Factory-fitted 3 kW immersion heater for backup / anti-legionella cycle
- G3 compliance kit included – cold-feed set, tundish, expansion vessel & controls
- Clearly labelled 28 mm compression fittings and sensor pocket
Specification
- Nominal capacity – 250 L
- Coil surface area – 2.97 m² | Coil rating – 33.08 kW
- Standing heat loss – 1.99 kWh / 24 h (83 W) ERP Band C
- Height – 1701 mm | Diameter – 545 mm
- Weight – 53 kg (empty) / 289 kg (full)
- Material – Duplex stainless steel | Insulation – 50 mm CFC-free PU foam
Warranty & Delivery
- 25-year cylinder warranty (2 years parts)
