Elite 150 / 50 L Heat Pump and Buffer Combined Pre-Plumbed Cylinder – Including 1 Circulating Pump (ESPPB5015X)
Free Delivery Available- Description
- Product Spec Sheet
Description
The Elite 150 / 50 L Heat Pump & Buffer Combined Cylinder offers a space-saving, pre-plumbed solution for modern heat pump systems.
Combining a 150 L domestic hot-water cylinder with a 50 L heating buffer, it provides hydraulic separation and stable flow for optimum system performance.
Key Features of the Elite 150 / 50 L heat pump and buffer
- Pre-plumbed design with 6 m circulating pump included
- Buffer and cylinder in one footprint – saves installation space
- Full G3 kit supplied: cold-feed pipework, tundish, drain point, filling loop, and 3 bar inlet control set
- 28 mm full-bore coil for fast recovery and quiet operation
- Factory-fitted 3 kW immersion heater for backup or anti-legionella cycles
- Supplied with 24 L heating expansion vessel (loose)
- Includes potable expansion vessel, Robokit T&P insulation cover, and service ports
- Duplex stainless-steel construction with 50 mm insulation
Specification
- Nominal capacity: 150 / 50 L
- Coil surface area: 1.61 m² | Coil rating: 23.46 kW
- Standing heat loss: 1.42 kWh / 24 h (59 W) ERP Band B
- Height: 2045 mm | Diameter: 475 mm
- Weight (empty / full): 47 kg / 247 kg
- 28 mm compression fittings | 12 mm sensor probe pocket
Warranty & Delivery
25-year cylinder warranty (2 years parts)
