Sunamp thermino 210 eplus product image
thermino eplus kitchen
thermno plus open
thermno plus range
Sunamp thermino 210 eplus product image
Sunamp Thermino 210 ePlus - Image 2
Sunamp Thermino 210 ePlus - Image 3
Sunamp Thermino 210 ePlus - Image 4

Sunamp Thermino 210 ePlus

£2,071.26 inc. VAT

[£1,726.05 exc. VAT]
For assistance call us on: 01260 228 822

In Stock! Order Now...

Accessory Kit

The Sunamp Accessory Kit includes all of the basic plumbing accessories required for a Sunamp installation. The pack includes an Inlet Control Group valve, a 2 litre expansion vessel, a TMV, and a lever ball isolation valve. Instructions for the valves with technical information are included in the box.

Inlet Control Group
Pressure Reducing Valve
Reduces incoming mains pressure to a safe level for safe appliance function
Pre-Set to 3.5 Bar

Non-return valve (check valve)
Ensures unidirectional flow of water (prevents backflow)

Safety Relief valve (SRV) (aka. Mains back expansion relief valve (BERV))
Triggered if excess pressure build-up is present in the system (as a last resort if the expansion vessel becomes depressurised)
Pre-set to 6 Bar

Expansion Vessel (EV), 2L
Maintains System pressure to safe levels as water is heated and cooled, absorbing any extra pressure build-up.
Charge pressure pre-set to 3.5 Bar (must have the same charge pressure as the PRV pressure setting!)

Thermostatic Mixing Valve (TMV), 22mm
To reduce DHW outlet temperature to safe-to-use temperatures to avoid any scalding injuries.
Recommended setting: 45-55 °C

Lever Ball Isolation Valve, 22mm
Local isolator to stop any mains water flow into the local appliance to enable safe and adequate maintenance and service work when required.

Pearl – HydroFLOW

Designed to protect against hard limescale deposits in domestic pipelines and on heating elements and surfaces.

SKU: SNP-KNW-AVZ-1 Categories: , Tags: ,

Description

Sunamp Thermino 210 ePlus – Designed to produce domestic hot water and is heated directly by Grid Electricity or Solar PV via the Optimino ePlus Key. When combined with a charge timer and a variable electricity tariff, the Thermino ePlus range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location.

The Thermino 210 ePlus would typically be installed in a 3 bedroom property as a rule of thumb.

Sunamp heat battery for charging from off-peak grid electricity. Perfect for apartments or off-grid applications.

Sunamp Thermino Heat Batteries are designed to efficiently store heat for domestic hot water systems. Their super-compact Heat Battery technology offers a uniquely clean, safe, compact and very low maintenance thermal energy storage solution.

Using the non-toxic phase change material (PCM), sodium acetate trihydride,  they can be charged with a variety of energy sources:

Note, the Sunamp is very heavy:

  • Tilting it beyond 45 degrees may damage the unit and void your warranty.
  • Standard delivery is only to curbside, if you believe you may need assistance moving this into your property, especially upstairs, please contact about a tailored delivery service we can provide for Sunamps.

For compatibility with different heat pump models please contact us for advice – not all heat pumps are compatible with Sunamp and selection of the appropriate Sunamp for a particular heat pump may not be obvious.

Thermino Heat Batteries

ePlus compatibility diagram

General Specifications

Product Code SNP-KNW-AVZ-1
Equivalent energy storage
10.5kW
Equivalent hot water capacity
212L
Water available at 40°C
301L
Weight in use
178kg
Height
870mm
Width 365mm
Depth
575mm
Storage core warranty
10 years
Other parts warranty
 2 years

Technical Specifications

Standing heat loss
32W
Energy efficiency rating C
Recommended flow rate
20 LPM
Minimum supply pressure
1.5 bar
Maximum supply pressure
10 bar
Annual electricity consumption
2,690kWh/annum

Power Inputs

Grid electricity
 Yes
Solar Panels
 Yes
Boiler
No
Heat Pump
 No

Need a different combination? See other Sunamp options here.

Sunamp Thermino ePlus – Documentation

Helpful online guidance

Standard delivery is only to curbside, if you believe you may need assistance moving this into your property, especially upstairs, please contact us about the tailored delivery service we can provide for Sunamps.

Delivery

Please contact us for precise delivery times.

Support

Call Our Team:

01260 228 822

Mon - Fri: 9am - 5pm

 

Storage core warranty: 10 Years
Other parts warranty: 2 Years