Sale

Sunamp UniQ 12 HW +i Heat Battery

£2,968.90 inc. VAT

[£2,474.08 exc. VAT]
For assistance call us on: 01260 228 822

SKU: DRP-BAW-ATY Categories: , Tags: ,

Description

Sunamp UniQ 12 HW + i heat battery for charging from a boiler or some heat pumps with immersion from the grid as backup. Perfect for a 4-5 bedroom property.

Thermino i (UniQ HW + i) – Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location.

The Thermino 300 i (UniQ 12 HW +i) would typically be installed in a 4-5 bedroom property as a rule of thumb.

This unit weighs 234 kg and tilting beyond 45 degrees may damage the unit so keep this in mind when finding a site for it.

 

Sunamp heat battery for charging from off-peak grid electricity. Perfect for apartments or off-grid applications.

Sunamp Thermino Heat Batteries are designed to efficiently store heat for domestic hot water systems. Their super-compact Heat Battery technology offers a uniquely clean, safe, compact and very low maintenance thermal energy storage solution.

Using the non-toxic phase change material (PCM), sodium acetate trihydride,  they can be charged with a variety of energy sources:

They can be retrofitted to existing hot water systems,  or specified for use in new build projects. Sunamp Heat Batteries can substitute a standard hot water tank in a fraction of the space.

The Thermino batteries are available in different models for different heat sources. The numbers in the product names represent equivalent hot water cylinder size.

For compatibility with different heat pump models please contact us for advice – not all heat pumps are compatible with Sunamp and selection of the appropriate Sunamp for a particular heat pump may not be obvious.

Thermino Heat Batteries

Thermino Heat Batteries

How is it charged?

An external hot water source such as a boiler or high temperature heat pump (HTHP) with a grid electricity backup via a 2.8kW immersion element.

What size of house should it be used in?

The Thermino 300 i (UniQ 12 HW +i) would typically be installed in a 4-5 bedroom property as a rule of thumb.

How much energy does it store?

The Thermino 300 i can store around 14.0kWh, or approximately the equivalent of a 284L hot water cylinder.

Note: This unit weighs 234 kg and tilting beyond 45 degrees may damage the unit so keep this in mind when finding a site for it.

Note: This generation of the Thermino i range currently have issues with integrating with the Vaillant Arotherm heat pumps.

Delivery

Please contact us for precise delivery times.

Support

Call Our Team:

01260 228 822

Mon - Fri: 9am - 6pm