Sale

LG 14kW R32 Monobloc ASHP 1ph kit with Standalone Cylinder Pkg

From: £6,752.67 inc. VAT

[£5,627.23 exc. VAT]
For assistance call us on: 01260 228 822

SKU: N/A Categories: , Tags: , , , , ,
Clear

Description

LG, Life's Good
  • Black Fin Heat Exchanger
  • 100% heating capacity at -7°C (@LWT 55°C)
  • CO~P up to 4.90 (7°/35°)
  • Intuitive Interface – User friendly

 

LG R32 Monobloc Air Source Heat Pumps

The THERMA V R32 Monobloc S is the 2nd generation of LG’s R32 Monobloc series. As implied by “silence” and “supreme,” it boasts reduced noise level and best performance in the
THERMA V Series. Combining the indoor and outdoor as one module, it’s also connected by only water piping eliminating the need for refrigerant piping. Furthermore, hydronic components like the plate heat exchanger, expansion tank, water pump, flow sensor, pressure sensor, air vent valve, and safety valve are conveniently situated inside the unit. The R32 Monobloc S provides excellent heating performance, especially at low ambient temperature while it lowering its carbon emissions with R32.

 

Enhanced installation flexibility

  •  All-in-one outdoor unit
  •  Low sound level allowing high installation location flexibility
  • ODU with built-in hydronic components : water pump, flow sensor, pressure sensor, expansion tank, air vent, etc.
  • User-friendly installation settings interface
  • Optional electric backup heater (3kW or 6kW)
  • Enhanced connectivity for 3rd party backup heater

High efficiency and wide operational range

  • R32 refrigerant with reduced global warming potential (GWP)
  • Less environmental impact with low refrigerant amount (compared to R410A)
  • 100% heating capacity at -15 o OAT (@ LWT 35o)
  • Improved heating operation at defrost condition
  • SCOP up to 4.67 (Average climate / Low temp. application) : A+++
  • SCOP up to 3.47 (Average climate / Mid temp. application) : A++
  • COP up to 4.90 (Outdoor air 7o / Leaving water 35o)
  • Leaving water temperature up to 65o
  • Expanded operative range of solar thermal system

Innovative design and technology

  • Improved heat exchanger design (New Black Fin)
  • Built-in water flow & pressure sensors to monitor real-time water circuit
  • Advanced water pump control (Optimal flow rate, fixed capacity, fixed flow rate)
  • Enhanced 2nd circuit control logic
  • Energy monitoring of estimated power consumption via remote controller
  • Modbus connectivity without gateway
  • Control for DHW recirculation pump based on schedule
UniCyl heat pump cylinders

UniCyl Cylinder

  • ▪ British-manufactured universal Heat Pump cylinder
    • Cylinder manufactured from high grade 1mm thick duplex stainless steel
    • Fully insulated with 50mm 100% CFC and HCFC free polyurethane insulation
    • All plumbing connections clearly identified and embossed onto cylinder casing
    • G3 compliant cold feed pipework
    • 12mm sensor probe pocket on all heat pump cylinders as standard

The following items are all included in this kit:

  • LG R32 Monobloc Single Phase Air Source Heat Pump – Refer to LG Datasheet
  • UniCyl Cylinder – Refer to UniCyl Datasheet
  • LG Tank Kit
  • 3 x Anti-Vibration Feet & Fixings
  • 1 Pair of 750mm Flexible Hoses
  • Cordivari 25 Litre (5kw, 7kW & 9kW) or 50 Litre (12kW, 14kW, 16kW) Buffer Tank
  • Buffer Tank Adaptor Set
  • 28mm Dirtmag IQ Prime
  • EPH Three Way Valve
  • Stuart Turner 15/60 (5kw, 7kW & 9kW) or 25/80 (12kW, 14kW, 16kW) Circulating Pump
  • Ball Valve Strainer & Isolators Pack
  • Flow Meter Pack
  • Thermox DTX Concentrate (10L) – One for 5kW, 7kW & 9kW units and two for 12kW, 14kW and 16 kW units
  • Isolator Switch – 32A (5kW, 7kW & 9kW) or 40A (12kW, 14kW and 16kW) units
  • ASHP Generation Meter
  • 18 Litre Expansion Vessel (12kW, 14kW and 16kW Units only)
  • CP4 Programmable Thermostat

Delivery to UK Mainland Only

LG 14kW R32 Monobloc ASHP 1ph with Standalone UniCyl Cylinder Kit

R32 Monobloc S ASHP: HM141MR.U34

Refrigerant & GWP R32 / 675
Capacity Range (kW) (1Ø&3Ø) 12 / 14 / 16
Energy Efficiency Class for Heating
A+++ / A++ (35℃ / 55℃)
Power Supply (V, Ø, Hz) 220-240, 1, 50
380-415, 3, 50
Dimension & Weight
(WxHxD,mm/kg)
1,239 × 1,380 × 330 / (1Ø) 111.9 (3Ø) 119.1
Sound Power Level (dB(A))
60 / 61 / 61
Operation Range (OAT, ℃) Heating : -25 ~ 35
Cooling : 5 ~ 48
Operation Range (LWT, ℃) Heating : 15 ~ 65
Cooling : 5 ~ 27 (16 ~ 27)1)
Operation Range (LWT, ℃) DHW : 15 ~ 802)

1) When fan coil unit is not used.
2) DHW 58 ~ 80°C operating is available only when the electric heater is operating.
*OAT : Outdoor Air Temperature, LWT : Leaving Water Temperature


UniCyl Cylinder

▪ British-manufactured universal Heat Pump cylinder
• Cylinder manufactured from high grade 1mm thick duplex stainless steel
• Fully insulated with 50mm 100% CFC and HCFC free polyurethane insulation
• All plumbing connections clearly identified and embossed onto cylinder casing
• G3 compliant cold feed pipework
• 12mm sensor probe pocket on all heat pump cylinders as standard

 

 

Standard warranty for LG products is 3 years.

If the installer has completed the 1 day LG Technical Training course, an extended 7 year warranty can be applied.

If you are interested in becoming an accredited installer, one-day courses are run by Unitherm in Exeter, and can be booked here:  https://www.unitherm.co.uk/pages/training. Courses cost £95 + VAT for the 1 day.  If the installer then goes on to purchase an LG unit, then LG/Unitherm will refund the cost of the course.

For installers that are new to fitting heat pumps, (e.g. gas installers that are looking to branch out), Unitherm also run a 3 day Installation & Maintenance of Air Source Heat Pumps Course which provides the knowledge and tools required to install competently. Book here: https://www.unitherm.co.uk/pages/training.