Sale

LG 9kW R32 Monobloc ASHP 1ph with Pre-Plumbed Cylinder

From: £5,121.21 inc. VAT

[£4,267.68 exc. VAT]
For assistance call us on: 01260 228 822

SKU: N/A Categories: , Tags: , , , , , , ,
Clear

Description

LG, Life's Good
  • Black Fin Heat Exchanger
  • 100% heating capacity at -7°C (@LWT 55°C)
  • CO~P up to 4.90 (7°/35°)
  • Intuitive Interface – User friendly

 

LG R32 Monobloc Air Source Heat Pumps

The THERMA V R32 Monobloc S is the 2nd generation of LG’s R32 Monobloc series. As implied by “silence” and “supreme,” it boasts reduced noise level and best performance in the
THERMA V Series. Combining the indoor and outdoor as one module, it’s also connected by only water piping eliminating the need for refrigerant piping. Furthermore, hydronic components like the plate heat exchanger, expansion tank, water pump, flow sensor, pressure sensor, air vent valve, and safety valve are conveniently situated inside the unit. The R32 Monobloc S provides excellent heating performance, especially at low ambient temperature while it lowering its carbon emissions with R32.

 

Enhanced installation flexibility

  •  All-in-one outdoor unit
  •  Low sound level allowing high installation location flexibility
  • ODU with built-in hydronic components : water pump, flow sensor, pressure sensor, expansion tank, air vent, etc.
  • User-friendly installation settings interface
  • Optional electric backup heater (3kW or 6kW)
  • Enhanced connectivity for 3rd party backup heater

High efficiency and wide operational range

  • R32 refrigerant with reduced global warming potential (GWP)
  • Less environmental impact with low refrigerant amount (compared to R410A)
  • 100% heating capacity at -15 o OAT (@ LWT 35o)
  • Improved heating operation at defrost condition
  • SCOP up to 4.67 (Average climate / Low temp. application) : A+++
  • SCOP up to 3.47 (Average climate / Mid temp. application) : A++
  • COP up to 4.90 (Outdoor air 7o / Leaving water 35o)
  • Leaving water temperature up to 65o
  • Expanded operative range of solar thermal system

Innovative design and technology

  • Improved heat exchanger design (New Black Fin)
  • Built-in water flow & pressure sensors to monitor real-time water circuit
  • Advanced water pump control (Optimal flow rate, fixed capacity, fixed flow rate)
  • Enhanced 2nd circuit control logic
  • Energy monitoring of estimated power consumption via remote controller
  • Modbus connectivity without gateway
  • Control for DHW recirculation pump based on schedule
UniCyl heat pump cylinders

UniCyl Heat Pump Cylinders

  • British-manufactured universal pre-plumb Heat Pump cylinder
  • Saves time on installation and commission
  • Cylinder and buffer vessel both manufactured from high grade 1mm thick duplex stainless steel
  • Fully insulated with 50mm 100% CFC and HCFC free polyurethane insulation
  • All plumbing connections clearly identified and embossed onto cylinder casing
  • Pre-plumbed primary pipework provided in 28mm copper
  • G3 compliant cold feed pipework
  • 12mm sensor probe pocket on all heat pump cylinders as standard
  • 2 x 12 way wiring centres (1 x DHW Controls, 1 x Heating Controls)
  • Universal mounting plate for heat pump interface
  • Flow meter
  • Heating circulation pump and 2 port zone valve
  • Magnetic filter
  • Filling link with pressure gauge

The following items are all included in this kit:

  • LG R32 Monobloc Single Phase Air Source Heat Pump
  • UniTherm UniCyl Pre-Plumbed Cylinder (150L, 170L, 200L, 225L)
  • OR World Heat Pre-Plumbed Cylinder (250L and 300L)
  • 3 x Anti-Vibration Feet & Fixings
  • 1 Pair of 750mm Flexible Hoses
  • Ball Valve Strainer & Isolators Pack
  • Thermox DTX Concentrate (10L) – One for 5kW, 7kW & 9kW units and two for 12kW, 14kW and 16 kW units
  • Isolator Switch – 32A for 5kW, 7kW & 9kW units and 40A for 12kW, 14kW and 16 kW units
  • ASHP Generation Meter
  • 18 Litre Expansion Vessel (12kW, 14kW and 16kW Units only)
  • EPH Programmable Thermostat

Delivery to UK Mainland Only

LG 9kW R32 Monobloc ASHP 1ph with Pre Plumbed UniCyl or World Heat Cylinder Kit

R32 Monobloc S: HM091MR.U44

Refrigerant & GWP R32 / 675
Capacity Range (kW) (1Ø) 5.5 / 7 / 9
Energy Efficiency Class for Heating
A+++ / A++ (35℃ / 55℃)
Power Supply (V, Ø, Hz) 220-240, 1, 50
Dimension & Weight
(WxHxD,mm/kg)
1,239 × 834 × 330 / 89.5
Sound Power Level (dB(A)) 57
Operation Range (OAT, ℃) Heating : -25 ~ 35
Cooling : 5 ~ 48
Operation Range (LWT, ℃) Heating : 15 ~ 65
Cooling : 5 ~ 27 (16 ~ 27)1)
Operation Range (LWT, ℃) DHW : 15 ~ 802)

 


Unicyl Pre-Plumbed Cylinder Range

  • British-manufactured universal pre-plumb Heat Pump cylinder
  • Saves time on installation and commission
  • Cylinder and buffer vessel both manufactured from high grade 1mm thick duplex stainless steel
  • Fully insulated with 50mm 100% CFC and HCFC free polyurethane insulation
  • All plumbing connections clearly identified and embossed onto cylinder casing
  • Pre-plumbed primary pipework provided in 28mm copper
  • G3 compliant cold feed pipework
  • 12mm sensor probe pocket on all heat pump cylinders as standard
  • 2 x 12 way wiring centres (1 x DHW Controls, 1 x Heating Controls)
  • Universal mounting plate for heat pump interface
  • Flow meter
  • Heating circulation pump and 2 port zone valve
  • Magnetic filter
  • Filling link with pressure gauge

250L and 300L cylinders are supplied by World Heat – details can be found here: 
World Heat Pre Plumbed Heat Pump Cylinder Range

UCYL15030HPSPP: 150L, UniTherm
UCYL17030HPSPP: 170L, UniTherm
UCYL20050HPSPP: 200L, UniTherm
UCYL22550HPSPP: 225L, UniTherm
250VCYLPP: 250L, World Heat
300VCYLPP: 300L, World Heat

 

 

Standard warranty for LG products is 3 years.

If the installer has completed the 1 day LG Technical Training course, an extended 7 year warranty can be applied.

If you are interested in becoming an accredited installer, one-day courses are run by Unitherm in Exeter, and can be booked here:  https://www.unitherm.co.uk/pages/training. Courses cost £95 + VAT for the 1 day.  If the installer then goes on to purchase an LG unit, then LG/Unitherm will refund the cost of the course.

For installers that are new to fitting heat pumps, (e.g. gas installers that are looking to branch out), Unitherm also run a 3 day Installation & Maintenance of Air Source Heat Pumps Course which provides the knowledge and tools required to install competently. Book here: https://www.unitherm.co.uk/pages/training.