Samsung HT Mono Quiet (14kW) 3 ph & Telford Tempest Pre Plumbed Cylinder (50L Buffer) Kit

From: £8,415.96 inc. VAT

[£7,013.30 exc. VAT]
For assistance call us on: 01260 228 822

SKU: N/A Categories: , , Tags: , , , , , , , ,
Clear

Concentrate HP Fluid

Filter Ball Valve

Braided Hose Straight

Braided Hose Elbow

Anti-Vibration Foot

ISO Valve

Pattern Strainer

Description

Telford Tempest Pre Plumbed 250L Cylinder 50L

Samsung Heat Source Air Pumps

Samsung EHS Mono HT Quiet R32 Heat Pump, 14kW 3ph

Samsung Air Source Heat Pumps are an energy-efficient system that use the heat from the ambient air for heating and hot water. By using the ambient air and transferring this heat into the house through a hydronic system, such as underfloor heating, a heat pump requires less power input and offers greater power output than conventional boilers.

• Hot Water Heating up to 70ºC

• Air Flow Rate (High / Mid / Low) 92 CMM

• Sound Pressure 42 dBA

The matte black finish creates a minimalist but premium feel which allows the HTQ to seamless integrate into a host of properties. The HTQ is designed to fit below a window without obstructing the view, thanks to its lower height and increased depth.

  • High hot water temperature
  • Low Noise
  • Aesthetic Design

Our EHS include a range of advanced technologies that can help optimize your energy usage. The Samsung EHS Mono HT Quiet has a SCOP* of A+++ energy efficiency rating therefore it is proven to operate with a high level of efficiency.

Telford cylinders

Telford Tempest Pre Plumbed Cylinder With 50L Buffer For Samsung Heat Pump

Pre-plumbed Tempest cylinders built for use with a Samsung heat pumps with an inbuilt 50 litre buffer. Featuring a purpose-designed coil with a large surface area to allow maximum heat transfer of renewable energy into the stored water.
Manufactured from Duplex stainless-steel, the cylinders have push-fit pre fabricated pipework and wiring to assist with a fast and easy installation.

Key Features:

  • Remote expansion vessel with factory-fitted wall mounting bracket
  • Full unvented kit supplied
  • Duplex stainless steel provides superior corrosion resistance
  • White steel cased finish
  • 316L grade stainless-steel 22mm compression fittings and coils
  • Supplies mains pressure hot water and high flow rates
  • Fast reheat
  • Factory-fitted temperature and pressure (T&P) relief value set
  • Highly efficient
  • Fully insulated to minimise any heat loss
  • Lifetime manufacturing warranty on inner container (2 years on components)*

*Terms & Conditions apply

EHS Mono HT Quiet, R32, Heat Pump, 14.00kW 3ph
AE140BXYDGG/EU

  • The Samsung EHS Mono HT Quiet has a SCOP* of A+++ energy efficiency rating.
  • 70°C Hot Water
  • Noise levels as low as 35 d(BA)2 using a 4-step Quiet Mode.
  • 12Kw Outputs
  • Low GWP Refrigerant – R32
  • RHI eligible (subject to conditions)
  • Heating [Btu/h] – 47,800 Btu/h
  • Heating [kW] – 14.00 kW
  • COP (Nominal Heating) – 5.05
  • Net Dimensions (WxHxD) (mm) – 1270 x 1018 x 530 mm

 

 

Telford Tempest Pre Plumbed Cylinder

All Telford Tempest cylinder sizes include an inbuilt 50 litre buffer, and are supplied with:

  • Samsung control board (MIM-E03EN)
  • 3-port valve
  • Secondary circulation pump
  • Filling loop
  • Pressure gauge
  • 15-22mm tundish
  • 22mm inlet group valve
  • Auto air vent

Technical Specifications: 

Telford Tempest 150L
Capacity: 150L
Weight (empty): na
Weight (full): na
Height: 1500mm
Diameter: 510mm
Coil size: 2.2m²
Standing heat loss:  1.36 kWh/24h
Max primary pressure:  3bar
T&P valve setting:  7bar / 90 Deg. C
Immersion heater:   3kW
Buffer Vessel:   50L (integrated)
Telford Tempest 170L
Capacity: 170L
Weight (empty): na
Weight (full): na
Height: 1540mm
Diameter: 580mm
Coil size: 2.2m²
Standing heat loss:  1.36 kWh/24h
Max primary pressure:  3bar
T&P valve setting:  7bar / 90 Deg. C
Immersion heater:   3kW
Buffer Vessel:   50L (integrated)
Telford Tempest 200L
Capacity: 200L
Weight (empty): na
Weight (full): na
Height: 1716mm
Diameter: 580mm
Coil size: 3.3m²
Standing heat loss: 1.64 kWh/24h
Max primary pressure:  3bar
T&P valve setting:  7bar / 90 Deg. C
Immersion heater:   3kW
Buffer Vessel:   50L (integrated)
Telford Tempest 250L
Capacity: 250L
Weight (empty): na
Weight (full): na
Height: 1921mm
Diameter: 580mm
Coil size: 3.3m²
Standing heat loss: 1.71 kWh/24h
Max primary pressure:  3bar
T&P valve setting:  7bar / 90 Deg. C
Immersion heater:   3kW
Buffer Vessel:   50L (integrated)
Telford Tempest 300L
Capacity: 300L
Weight (empty): na
Weight (full): na
Height: 2115mm
Diameter: 580mm
Coil size: 3.3m²
Standing heat loss: 1.82 kWh/24h
Max primary pressure:  3bar
T&P valve setting:  7bar / 90 Deg. C
Immersion heater:   3kW
Buffer Vessel:   50L (integrated)
Delivery

Please contact us for precise delivery times.

Support

Call Our Team:

01260 228 822

Mon - Fri: 9am - 6pm

Samsung Heat Source Air Pumps

Please get in touch for details on the warranty available with this Samsung Product.

Find approved MCS installers in your area »

Telford warranty: lifetime manufacturing warranty on inner container (2 years on components) -to register a cylinder for warranty, please click here.