Stiebel Eltron WPE-I 06 HW 230 Premium Pack

£14,847.60 inc. VAT

[£12,373.00 exc. VAT]
For assistance call us on: 01260 228 822

Description

STIEBEL ELTRON - PLEASE CALL FOR TRADE PRICES

01260 228 822

logo stiebel

Application • This compact ground source heat pump with output-dependent control and inverter technology is installed indoors. It has an integral DHW cylinder and is combined with a separate buffer cylinder. • Due to the very high flow temperatures of up to 75 °C, the heat pump is ideal for use in new and modernised buildings.

A heat pump controller is integrated for fully automatic, weather-compensated control of the heating system. • Both the brine and heating sides are equipped with a high-efficiency circulation pump. • An insulated pump assembly supplies the heat distribution system.

  • Mono mode operation is possible for heating and DHW thanks to higher flow temperatures
  • Inverter technology allows ideally matched heating output through the variable speed compressor
  • Easy and time-saving installation, due to high level of integration and inclusion of accessories
  • Easy to transport as the refrigerant circuit and cylinder module can be separated from one another and are fitted with integral carrying handles
  • Buffer cylinder to separate the flows for maximum operational reliability

Connect with a Standard Pre-Plumbed Cylinder for an eco-friendly, low cost hot water solution. With its sleek design and pre-plumbed architecture, the space requirements for the pre-plumbed hot water cylinder have been reduced dramatically.

Unvented Cylinders & Smart Cylinders can also be used in conjunction with our Air Source Heat Pumps.

Technical data

Energy efficiency class, heat pump W35

A+++

Energy efficiency class, heat pump W55

A+++

Energy efficiency class, composite system (heat pump + controller) W35

A+++

Energy efficiency class, composite system (heat pump + controller) W55

A+++

Energy efficiency class, DHW heating with load profile XL

A

Heating output at B0/W35 (EN 14511)

2,37 kW

Heating output at B0/W35 (min./max.)

1,0 – 6,6 kW

Nominal capacity

175 l

Surface area, heat exchanger

2.40 m²

COP at B0/W35 (EN 14511)

4.60

SCOP (EN 14825)

5.20

Sound power level (EN 12102)

43 – 48 dB(A)

Min. installation room volume

10 m³

Height

1937 mm

Width

600 mm

Depth

703 mm

Weight

265 kg

Rated voltage, compressor

230 V

Rated voltage, emergency/auxiliary heater

230 V

Refrigerant

R454C

Material Description Material Part Number Qty
WPE-I 06 HW 230 Premium 202638 1
SBP 100 classic – freestanding (buffer tank) 206279 or 235200 1
WPKI-HK E (central heating pump) 233602 or 206627 1
FS-WP 22 233511 1
FET 234723 1
ISG web 229336 1
WPSF 233307 1
Delivery

Please contact us for precise delivery times.

Support

Call Our Team:

01260 228 822

Mon - Fri: 9am - 6pm