Stiebel Eltron WPL-A Premium Pack 3 – with the sbb 300

£11,737.20 inc. VAT

[£9,781.00 exc. VAT]
For assistance call us on: 01260 228 822


logo stiebel

Application • Mono block heat pump with output-dependent control, with highly integrated indoor module for space-saving and rapid installation. • Flow temperatures of up to 75 °C are available for room heating and DHW heating. • It can be used in a wide range of different heating distribution systems, as the heat pump is separated from the heat distribution system by means of an integral buffer cylinder. • The indoor module contains the following: DHW cylinder, cylinder charging pump, heating circuit pump, 3/2-way diverter valve, safety valve, electric emergency/auxiliary heater and the heat pump manager which is used to control the system.

  • Air source heat pump set for maximum efficiency in new build or modernisation
  • Mono block heat pump, with its variable-speed compressors, ensures perfectly matched heating output and high flow temperatures all year round
  • DHW cylinder and buffer cylinder with integral hydraulic components including heat pump manager for heat pumps and heating circuit connection in a single casing
  • Thanks to flow separation, the heating system can be integrated easily and very safely

Connect with a Standard Pre-Plumbed Cylinder for an eco-friendly, low cost hot water solution. With its sleek design and pre-plumbed architecture, the space requirements for the pre-plumbed hot water cylinder have been reduced dramatically.

Unvented Cylinders & Smart Cylinders can also be used in conjunction with our Air Source Heat Pumps.

Technical data

Energy efficiency class, heat pump W35


Energy efficiency class, heat pump W55


Energy efficiency class, composite system (heat pump + controller) W35


Energy efficiency class, composite system (heat pump + controller) W55


Heating output at A7/W35 (EN 14511)

3.31 kW

Heating output at A2/W35 (EN 14511)

3.19 kW

Heating output at A-7/W35 (EN 14511)

4.97 kW

Max. cooling capacity at A35/W7

4.73 kW

Cooling capacity at A35/W18 partial load

3.37 kW

Max. cooling capacity at A35/W18

6.86 kW

COP at A7/W35 (EN 14511)


COP at A2/W35 (EN 14511)


COP at A-7/W35 (EN 14511)


Max. energy efficiency ratio at A35/W7


Energy efficiency ratio at A35/W18 partial load


Max. energy efficiency ratio at A35/W18


SCOP (EN 14825)


Sound power level (EN 12102)

48 dB(A)

Min./max. application limits for heat source

-25/40 °C

Max. application limit on the heating side

75 °C


900 mm


1270 mm


593 mm


135 kg

Rated voltage, compressor

230 V

Rated voltage, emergency/auxiliary heater

230 V



WPL-A 07 Premium 200123 1
SBB 300-1 Plus GB 202923 1
SBP 100 classic – freestanding (buffer tank) 206279 or 235200 1
FET 234723 1
ISG web 229336 1
UP 25 / 7.5 PCV 201620 2
WPM 234727 1
WPKI-HK E (central heating pump) 233602 or 206627 1
FS-WP 28 (filter) 233512 1

Please contact us for precise delivery times.


Call Our Team:

01260 228 822

Mon - Fri: 9am - 6pm